Horizontal Split Double Suction Centrifugal Water Pump
Technical Parameter:
Diameter of pump outlet: DN80-800mm
Pump flow range: Q≤ 11600m3/h
Pump lift head range: H≤ 200m
Pump working pressure: P≤ 2.5Mpa
Pump working temperature: T≤ 105 deg C
Pump working voltage: U=380V, 6kV, 10kV
Product Introduction:
TPOW series single-stage double-suction split volute centrifugal pump is produced by our company based on importing the advanced technology from Germany in accordance with the market demand. By using the original and modified impeller and cutting, the pump boasts a full and wide range of spectrum and high service efficiency. The water pump can provide the working points of any flow and lift head required by the user within the spectrum performance range. TPOW pump adopts a hydraulic model with the self-balancing axial force and radial force, which is the best both at home and abroad currently. It boasts stable performance, high efficiency, compact structure, small vibration, strong resistance to pressure of pump body and being easy for installation and maintenance.
Main Purpose:
TPOW series of product is widely used for water plant, irrigation, drainage pumping station, power station, water circulation of air-conditioning, industrial water supply system, fire system and shipping industry as well as for the general purpose in the oil refining industry.
Hydraulic performance:
It adopts the internantional advanced computer aided software and the modern design methods(namely optimum design and reliable design approach) for the hydraulic and structural design of the pump so that TPOW double-suction pump boasts efficient and noticeable resistance to cavitation. Compared with home-made like products, this series of product has a 2-4% higher efficiency and noticeably stronger cavitation resistance, which will save a lot of capital for the user.
Structural Features:
1. Compact structure, space effective and much shorter axial dimensions.
2. Small vibration and low noise, achieved mainly by means of the follow:
A. The pump casing adopts the double-volute structure;
B. The rotor part has short axial dimensions and a good rigidity.
C. The pump shaft adopts the imported high-precision bearing for the support.
Working Conditions:
The maximum working pressure of TPOW volute double-suction pump system is 2.5Mpa, namely pump inlet pressure +pump lift head≤ 2.5Mpa, and the test pressure of pump static pressure is 3.75Mpa. According to the maximum pressure that the pump body can bear, the materials for body and bonnet adopt the grey cast iron(1.6Mpa), spheroidal graphite cast iron(2.0Mpa)and cast steel (2.5Mpa). Please note the pump's bearing pressure or materials in the order. This series of pump can transport the clear water or other liquids with similar physical and chemical properties as clear water with temperture T≤ 105 deg C.
Type Designation:
TPOW 300 - 450(I)A
TPOW - TPOW Volute type split casing double suction pump
300 - diameter of pump outlet (mm)
450 - nominal diameter of impeller (mm)
I - Flow classification
A - rimary cutting of impeller
Partial Technical Parameters:
| TPOW500-520(I) |
|
3217.5 |
893.8 |
25 |
82 |
980 |
280 |
375.2 |
| A |
3088 |
857.8 |
23 |
75.44 |
250 |
335 |
| B |
2964.5 |
823.3 |
21 |
68.88 |
220 |
294.8 |
| C |
2846 |
790.6 |
18.4 |
60.352 |
200 |
268 |
| D |
2732 |
758.9 |
16.3 |
53.464 |
180 |
241.2 |
| TPOW500-520 |
|
2777 |
771.4 |
22.5 |
73.8 |
980 |
220 |
294.8 |
| A |
2638 |
732.8 |
19.5 |
63.96 |
200 |
268 |
| B |
2484 |
690 |
15.6 |
51.168 |
160 |
214.4 |
| C |
2178.5 |
605.1 |
13.8 |
45.264 |
132 |
176.88 |
| TPOW500-650(I) |
|
3510 |
975 |
41.5 |
136.12 |
980 |
500 |
670 |
| A |
3352.5 |
931 |
38.7 |
126.936 |
450 |
603 |
| B |
3172.5 |
881 |
36 |
118.08 |
400 |
536 |
| C |
3015 |
837.5 |
33.2 |
108.896 |
355 |
475.7 |
| D |
2767.5 |
768.8 |
29.7 |
97.416 |
315 |
422.1 |
| TPOW500-650 |
|
2992 |
831.3 |
33.7 |
110.536 |
980 |
355 |
475.7 |
| A |
2835 |
787.5 |
30.2 |
99.056 |
315 |
422.1 |
| B |
2722.5 |
756.3 |
27.7 |
90.856 |
280 |
375.2 |
| C |
2642.5 |
706 |
24 |
78.72 |
250 |
335 |
| TPOW500-710(I) |
|
3852 |
1070 |
64.4 |
211.232 |
980 |
900 |
1206 |
| A |
3672 |
1020 |
59.2 |
194.176 |
800 |
1072 |
| B |
3470.4 |
964 |
53 |
173.84 |
710 |
951.4 |
| C |
3204 |
890 |
47.7 |
156.456 |
560 |
750.4 |
| D |
3024 |
840 |
42 |
137.76 |
500 |
670 |
| TPOW500-710 |
|
3006 |
835 |
49 |
160.72 |
980 |
560 |
750.4 |
| A |
2812.5 |
781.3 |
44.2 |
144.976 |
450 |
603 |
| B |
2632.5 |
731.3 |
39.3 |
128.904 |
400 |
536 |
| C |
2407.5 |
668.7 |
34.6 |
113.488 |
355 |
475.7 |
| TPOW500-800(I) |
|
3996 |
1110 |
80.6 |
264.368 |
980 |
1120 |
1500.8 |
| A |
3600 |
1000 |
72.8 |
238.784 |
900 |
1206 |
| B |
3204 |
890 |
65.3 |
214.184 |
800 |
1072 |
| C |
2880 |
800 |
58 |
190.24 |
630 |
844.2 |
|
| Type |
|
Flow |
Lift head |
Rotate speed |
Motor power |
|
| |
(m³ /h) |
(l/s) |
(m) |
(feet) |
(r/min) |
(kw) |
(hp) |
| TPOW80-220(I) |
|
83.5 |
23.2 |
13.8 |
45.264 |
1480 |
5.5 |
7.37 |
| A |
77.2 |
21.4 |
11.8 |
38.704 |
4 |
5.36 |
| B |
70.4 |
19.6 |
9.8 |
32.144 |
3 |
4.02 |
| C |
64.4 |
17.9 |
8.2 |
26.896 |
3 |
4.02 |
| |
164.5 |
45.7 |
55 |
180.4 |
2950 |
37 |
49.58 |
| A |
152.9 |
42.5 |
47.5 |
155.8 |
30 |
40.2 |
| B |
138.5 |
38.5 |
39 |
127.92 |
30 |
40.2 |
| C |
128.4 |
35.7 |
33.5 |
109.88 |
22 |
29.48 |
|
| TPOW80-280(I) |
|
104.5 |
29 |
22.5 |
73.8 |
1480 |
11 |
14.74 |
| A |
96 |
26.7 |
19 |
62.32 |
11 |
14.74 |
| B |
88.1 |
24.5 |
16 |
52.48 |
7.5 |
10.05 |
| C |
79.4 |
22 |
13 |
42.64 |
5.5 |
7.37 |
| |
208 |
57.8 |
90 |
295.2 |
2950 |
75 |
100.5 |
| A |
192.4 |
53.4 |
77 |
252.56 |
75 |
100.5 |
| B |
174.7 |
48.5 |
63.5 |
208.28 |
55 |
73.7 |
| C |
155 |
43 |
50 |
164 |
37 |
49.58 |
| TPOW80-280 |
|
86 |
23.9 |
20.7 |
67.896 |
1480 |
7.5 |
10.05 |
| A |
80.4 |
22.3 |
18.1 |
59.368 |
7.5 |
10.05 |
| B |
73.2 |
20.3 |
15 |
49.2 |
5.5 |
7.37 |
| C |
66.8 |
18.6 |
12.5 |
41 |
4 |
5.36 |
| |
172 |
47.8 |
82.5 |
270.6 |
2950 |
75 |
100.5 |
| A |
160 |
44.4 |
71.5 |
234.52 |
55 |
73.7 |
| B |
146.7 |
40.8 |
60 |
196.8 |
45 |
60.3 |
| C |
132.6 |
36.8 |
49 |
160.72 |
30 |
40.2 |
|
For more specifications please don't hesitate to contact with us :)
Packaging & Shipping
Our Services
Service before sale Service after sale
* requesting and consulating * training about installation and operation
* catalogs, technical supports * engineers online 7*24hr
* visiting factory
FAQ
1. Q: are you trading company or manufacturer?
A: Shanghai Pacific Pump Manufacture (Group) Co.,Ltd. is a large-scale manufacturer located in Shanghai China with nearly 30 years manufacturing experience, with floor area nearly 120,000sqm.
2. Q: Could you introduce your workshop or factory?
A: our factory facilities include casting, machining, lathing, heat treatment, assembly, testing, etc. You are welcome to visit us at any time.
3. Q: How is the price of your products?
A: Our price is based on Exw Shanghai factory, and we insist on high quality to realise long term cooperation.
4. Q: What if the pump or spare parts have problem during the operation?
A: we'd need you provide description of the problem, and send necessary pictures or videos. We will study and provide our solution immediately.
5. Q: We don't know how to select the proper model, could you help us?
A: Yes. please tell us your detailed requirements including liquid to be pumped, flow rate, head, etc. our engineers'team will calculate and suggest the model proper model for you.
If you have other questions, please don't hesitate to contact with us :)
Company Profile
Shanghai Pacific Pump Manufacture (Group) Co.Ltd. is one of the leading pump manufacturer in China,specializing in manufacturing centrifugal water pumps, submersible pumps, fire pumps, water supply system and control panels with various and complete specifications. The headquarter of Pacific Pump is located in Shanghai. We have four factories for pumps and motors located in Shanghai and Wen Zhou city.
Our factories in shanghai covers 67,000 square meters and we have more than 1000 employees, including more than 30 senior and intermediate professional technicians. We own more than 300 sets of advanced production and inspection equipment to manufacture products of various categories and specifications. Our company is a member of China Pump Industry Association and National Pump United Distribution Association and also a supplier of CNPC and SINO PEC.
"Not to be the largest, but to be the best, taking science and technology as priority, devoted ourselves to the work" is our tenet. We sincerely hope to cooperate with new and old customers from all over the world to gain mutual benefits.
Certifications
Trade Shows
Related Products
){kind=link}
){kind=link}